36 x 12 Rectangular Drop In Pan with Bullet Burner and Certified Electronic Ignition
Suitable for either Nat. Gas or Propane. No Air Mixer Valve required for Propane if using a Bullet Burner
By combining a drop in tray with an 24 x 6 'H' Bullet Burner, The Outdoor Plus Company have created a very durable, easy to install and virtually maintenance free CL certified unit. The Bullet Burner is patented technology that creates a much bigger flame than the standard type of burners whilst consuming considerably less gas! See Video below.
1 Minute Video Comparing Bullet Burner to Standard Burner
Drop In Tray
Manufactured from 304 Grade Stainless Steel, Drop In pans are the ideal solution for some fire pit projects. They are durable, easy to install and maintain, and can considerably reduce the quantity of fire glass needed to finish off the project. The recessed area of the pan measures 36 x 12" inches with a 1 inch flange all around. Cut out size to 'drop in' this pan would be 36 1/2 x 12 1/2". The pan is 2 inches deep.
This amazing flame is created by patented technology that evenly distributes the gas to all ports of the burner via the Hexagonal Uniform Hub. The precisely placed Bullet orifice provides the most efficient and effective flame by compressing the gas flow and forcing it out via the Flame Spreader. This 24 x 6 inch burner has a LC Certification for 65,000 BTU's.
Important Note: If using propane this burner does NOT require a Propane Air Mixer Valve to be fitted.
Certified Part #: OPT-BFP1236RE
Type: Bullet Burner Fire Pit System
Gas Type: Propane/Natural Gas
Material: Brass Burner /SS Tray
Burner: 24 x 8
Burner Height: 2 1/2”
Inside Pan Dimensions: 36 x 12
Pan Height: 2”
Thread Size: 1/2”
Ignition: Electronic Ignition
Certified BTU’s: 120,000
Weight: 11 lbs
Items Included: Brass Burner, SS Drop In Pan and Electronic Ignition System
Installation Manual - Download here